Lawo’s .edge Receives Audio Supercharge And Provides Color Correction

At IBC 2024, Lawo will announce important additions to the audio and video capabilities of .edge. They include two new built-in parameters – Audio Gain and Phase Inversion – as well as the optional possibility to leverage an 8192-input x 4096-output audio matrix per .edge processing blade. Video color correction is also available as an optional license.

Operators can now adjust the levels of audio channels embedded in incoming SDI signals for up to 32 SDI inputs (@1080p), each carrying up to 32 audio signals. Each input has a dedicated Audio Gain control (–30dB~+18dB). The same applies to SDI outputs: in this case, changes to the gain are applied after the standard Audio Shuffler and Embedder.

The Phase Inverter on each input channel allows to compensate for unwanted interference and artefacts often due to microphone placements at differing distances from the signal source. Outputs are also equipped with this new Phase Inverter.

Audio Matrix Shuffler (.amshuff)
The optional Audio Matrix Shuffler license, which can be activated permanently or temporarily via Lawo’s Flex Subscription licensing mechanism, expands the capability of a .edge blade way beyond its standard Audio Shuffling functionality.

Each SDI output on a blade already has an Audio Shuffler that allows operators to select any mono audio channel from its 4 IP receivers, and embed it into a single SDI output, with up to 32 audio channels for a 1080p SDI setup.

.amshuff equips the selected processing blade with 128 receivers and 64 senders, each supporting 64 audio channels. All input streams (RX/receivers) go into an 8192 x 4096 routing matrix where their sources can be patched to one of the 64 outgoing streams (TX/senders).

Patch connections of individual mono channels are established inside the processing blade using VSM.

Where required, all processing blades in a .edge frame can be assigned a .amshuff instance. In addition, the sender side provides separate audio test tone generators for testing and troubleshooting purposes.

.edge Color Corrector (.colcor)
The optional Color Corrector license equips .edge with an on-location RGB/YUV color correction tool. Up to 32 color correctors are available per .edge blade. Color corrections are performed upstream of any proxy generation, and only legal colors/values are passed on (auto-clipping to “legal” levels). Color space conversions (UHD 12G-SDI BT 2020 – 1080p BT 709 without HDR conversion) are also supported. Like .amshuff, .colcor is available per .edge processing blade.

You might also like...

HDR & WCG For Broadcast: Part 3 - Achieving Simultaneous HDR-SDR Workflows

Welcome to Part 3 of ‘HDR & WCG For Broadcast’ - a major 10 article exploration of the science and practical applications of all aspects of High Dynamic Range and Wide Color Gamut for broadcast production. Part 3 discusses the creative challenges of HDR…

IP Security For Broadcasters: Part 4 - MACsec Explained

IPsec and VPN provide much improved security over untrusted networks such as the internet. However, security may need to improve within a local area network, and to achieve this we have MACsec in our arsenal of security solutions.

Standards: Part 23 - Media Types Vs MIME Types

Media Types describe the container and content format when delivering media over a network. Historically they were described as MIME Types.

Building Software Defined Infrastructure: Part 1 - System Topologies

Welcome to Part 1 of Building Software Defined Infrastructure - a new multi-part content collection from Tony Orme. This series is for broadcast engineering & IT teams seeking to deepen their technical understanding of the microservices based IT technologies that are…

IP Security For Broadcasters: Part 3 - IPsec Explained

One of the great advantages of the internet is that it relies on open standards that promote routing of IP packets between multiple networks. But this provides many challenges when considering security. The good news is that we have solutions…