Blackmagic Design Brings Out New SMPTE ST2110 Compliant IP Converter

​The Blackmagic 2110 IP Converter 3x3G is a new rack mount converter which converts 3G-SDI devices to 2110 IP broadcast systems. The new Blackmagic 2110 IP Converter 3x3G features 10G Ethernet which means it can support up to 3 separate 3G-SDI video channels at the same time. Each channel has independent inputs and outputs, for connecting up to 6 different SDI devices. Blackmagic 2110 IP Converter 3x3G includes an elegant front panel with a color LCD for monitoring, menus and diagnostics.

The Blackmagic 2110 IP Converter 3x3G has been designed to integrate any 3G-SDI equipment into 2110 IP broadcast systems. The rack mount design means it can be installed in equipment racks right next to the equipment users are converting. The Universal Rack Shelf lets customers install up to 3 units side by side for a total of 9 separate input and output channels in a single rack unit. They can also be remote managed over Ethernet. With conversion to and from 3G-SDI in the same unit, it can handle a wide range of equipment. Simply add a Blackmagic 2110 IP Converter 3x3G to live production switchers, disk recorders, playback servers, streaming processors and more.

Unlike using a number of mini converters, Blackmagic 2110 IP Converter 3x3G is rack mountable and includes a front panel with LCD, so customers can walk up and change settings at any time. The front panel LCD also has the benefit of allowing live video monitoring of all input and output channels. Plus, the LCD includes network diagnostics tools to assist in diagnosing problems in complex 2110 IP broadcast systems. The LCD also includes routing menus for selecting the IP source for each of the 3G-SDI outputs. It’s just like a mini router. With active fan based cooling, the converters will stay cool, even when rack mounted side by side. For redundancy, customers also get both AC and PoE+ Ethernet power.

The Converter includes 3 x 3G-SDI outputs and 3 x 3G-SDI inputs with loop outputs. Plus the 10G Ethernet connection supports 3 input and 3 output channels all at the same time. The channels are independent so they can be completely different video standards. Each 3G-SDI input features re-sync, so customers can connect any SDI source and the input video will be re-timed to the 2110 PTP clock automatically. Plus there's a reference output so customers can lock external SDI equipment to the 2110 PTP clock if customers don't want the re-sync to be used. The Blackmagic 2110 IP Converter eliminates annoying power bricks as it features 100-240V AC power as well as PoE+ on the 10G Ethernet port.

The unit conforms to the SMPTE ST2110 standard for IP video, which specifies the transport, synchronization and description of video, audio and ancillary data over managed IP networks for broadcast. It can also re-sync SDI inputs to a common PTP clock or external gear can lock to the reference output that’s also generated from the PTP clock. Blackmagic 2110 IP Converter supports SMPTE-2110-20 uncompressed video, SMPTE-2110-21 tra6c shaping/timing, SMPTE-2110-30 audio and SMPTE-2110-40 for ancillary data. Plus Blackmagic 2110 IP Converter supports multicast, which is an e6cient way of distributing video, audio and data from a single source to multiple destinations.

Additionally the 2110 IP supports the NMOS interface specifications so all 2110 IP video devices can operate together as a large virtual router. Plus Videohub Smart Control Pro can route sources to destinations on 2110 IP networks because it can act as an NMOS controller. The NMOS interface specification describes how SMPTE 2110 devices such as DeckLink IP are discovered and controlled on IP networks. Blackmagic 2110 IP Converter supports IS-04 for discovery and registration of IP video devices and IS-05 for connection management between IP video devices. This means customers can make connections between sources and destinations just like a traditional SDI router.

You might also like...

Production Network Technologies At NAB 2025

As NAB approaches we pick up the key theme of hybrid production network infrastructure that combines SDI-IP network infrastructure & data center model compute resources, with a run-down of what to expect from vendors on the show floor.

KVM & Multiviewer Systems At NAB 2025

It’s NAB time again. Once again, as we head towards the show, we will take a look at the key product announcements across a range of key technology and workflow areas. We begin with the always critical world of K…

Sports Production Infrastructure – Where’s The Compute?

The evolution of IP based production and increased computer processing power have enabled new workflows, so how is compute resource being deployed to create new remote and hybrid approaches?

Building Software Defined Infrastructure: Shifting Data

The fundamental principles of how data flows through local and remote processing systems are central to designing software defined infrastructure.

BEITC At NAB 2025: Conference Sessions Preview - Part 2

Once again in 2025 The Broadcast Bridge is proud to be the sole media partner for the BEIT Conference Sessions at NAB. They are not free, but the conference sessions are a unique opportunity to engage with very high quality in-person…